Vanagon Syncro AWD F4-2109cc 2.1L (MV) (1989)
-
Drive in flange
-
Mount handle 3145 and tighten flange shaft nut to 160 Nm (118 ft lb)
-
Install driveshaft and tighten bolts to 35 Nm (26 ft lb)
-
Drive in flange
-
Mount handle 3145 and tighten flange shaft nut to 160 Nm (118 ft lb)
-
Install driveshaft and tighten bolts to 35 Nm (26 ft lb)