Vanagon Syncro AWD L4-2109cc 2.1L (1987)
^ install oil pan 3, and bolts 4 Part No. N 102 429 01, Qty. 10
^ Tighten diagonally
^ Torque: 30 N-m (22 ft.lb.)
^ refill final drive housing with hypoid oil, SAE 90, API - GL5, or Mil-L2105 B
^ Capacity: 1.25 ltr. (1.3 US qt.)
When transmissions with date code 28011 or higher exhibit oil leakage, replace oil pan gasket only, unless other damage is noted.
^ drain oil from final drive assembly
^ remove oil pan bolts
^ remove oil pan and gasket, discard gasket
^ clean gasket fragments from oil pan and final drive housing
CAUTION
Inspect oil pan for distortion or damage. Inspect the sealing surface for gasket fragments, distortion or other damage, especially around the bolt holes.
Always replace damaged oil pans.
^ install new oil pan gasket 2 Part No. 090 507 215
^ install oil pan 3, and bolts 4
^
Tighten diagonally
^ Torque: 30 N-m (22 ft.lb.)
^ refill final drive housing with hypoid oil, SAE 90, API - CLS, or Mil-L2105 B
^ Capacity: 1.25 ltr. (1.3 US qt.)
CAUTION
Part numbers are for reference only. Always check with your Parts Department for latest parts information.
Technical Service Bulletin #
398701
Date: 870701
Final Drive Flange Seal - Leaking Under Car
GROUP