240 L4-2.3L SOHC VIN 88 B230F (1986)
The 554 control unit already incorporates the revised programming of the kit.
Connect:
-
BL-Y lead to BN lead in car's wiring harness
-
GR lead to BL lead in car's wiring harness
-
short SB lead to one of SB leads in car's wiring harness which connects terminal 11 to terminal 19 in LH connector with bridge connector 112
(2- pole connector).
Attach service kit to wiring harness with insulating tape.
A -
Car wiring harness
B -
Lead to instrument panel
C -
Scotch-lock
D -
LH connector
112 -
Bridge connector
Route long SB lead under instrument panel.
Remove instrument panel.
Connect long SB lead with Scotchlock clamp to black wire at terminal 5 on 12-pole connector.