240 L4-2.3L SOHC VIN 88 B230F (1986)
Remove choke in the drainage hose (Applies from model year 1992)
Clean out the drainage hose and choke. A cable tie or strip clamp can be used as a tool to clean out the hose.
Reinstall choke in the drainage hose. It should be located approx. in the middle of the hose. Open recirculation door and remove any debris.
Reinstall drainage hose on heater and grommet in transmission tunnel
Fold back carpet
Reinstall side panel on center console. Reinstall sound insulation.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty for removal of glue residue from the drainage hose on a on-time basis ONLY.
OPERATION NO.
LABOR DESCRIPTION
TIME ALLOWANCE
87338-2
Cleaning heater unit drainage hose
0.2 hr
