240 L4-2.3L SOHC VIN 88 B230F (1986)
-
Disconnect Lambda sond
-
Turn adjustment knob on Mono-tester to 4-cyl.
At correct CO level, pointer should move between 2O°-7O°.
Adjusting CO
CO should only be adjusted after all possible faults have been checked/rectified.
-
Turn off engine.
-
Drill two 2 mm (0.08 in.) holes in plug.
-
Withdraw plug with circlip pliers.
-
Start engine.
-
Adjust CO content so that Mono-tester pointer moves between 2O°-7O°.