240 L4-2127cc 2.1L SOHC B21F (1982)
Pulleys With Align Marks
TIMING BELT REMOVAL
-
Remove timing belt cover.
-
Turn crankshaft clockwise using center bolt. Set camshaft so that pulley marking is opposite marking on valve cover.
Timing Belt Removal
-
Slacken belt tensioner nut approx. one turn.
-
Pull out belt so that belt tensioner spring is compressed.
-
Tighten belt tensioner nut.
-
Lift timing belt off camshaft pulley.
CAUTION: Do not turn crankshaft or camshaft while timing belt is removed. Pistons will strike valves.
