volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Coolant Pump <--> [Water Pump]|Removal|Page 828 > < Coolant Pump <--> [Water Pump]|Removal|Page 826
Page 2
background image

Fan Shroud - Fan - Lower Radiator Hose

Fan Shroud

Reconnect/Install: 

1. Timing gear cover.
2. Water pump pulley.
3. Drive belts (loosely at this stage).
4. Lower radiator hose.
5. Fan shroud.
6. Fan.

Tighten Drive Belts: 

1. It should be possible to depress belt 5-10 mm (0.20-0.40 in) in center of one of runs, using light thumb pressure.

Filling With Coolant

Fill With Coolant: 

1. Tighten drain cock.
2. Fill expansion tank to "maximum" level
3. Set heater control to "Hot" and run engine until warm.
4. Check for leaks. Top-up if necessary.

Coolant Pump <--> [Water Pump]|Removal|Page 828 > < Coolant Pump <--> [Water Pump]|Removal|Page 826