240 L4-2127cc 2.1L SOHC B21F (1982)
Install:
-
both lower heater mounting screws.
-
mounting screw to air duct to rear floor.
Note: New type heat control valve on 1992 models onwards: go to C40 - C44.
C36
Make a 3 mm (0.118") cutout in the floor vent for the sensor head, 25 mm (0.984") from the RH edge:
The sensor head must fit tight.
C37
Straighten sensor head out slightly. Put coil in heater duct.
C38
