240 L4-2127cc 2.1L SOHC B21F (1982)
Oxygen Sensor: Testing and Inspection
Lambda Testing W/ Volt Meter
Fig. 76 CHECK LAMBDA SOND FUNCTION
To test the Lambda sond, all potential problems influencing a Lambda sond reading (ignition, fuel injection, intake and exhaust system etc.) must be
checked and corrected.
As an alternative checking method, the Lambda sond can be checked with a volt meter:
Run the engine until 5 minutes after it has reached operating temperature.
Disconnect Lambda sond.
With the engine running, connect a volt meter to the sond Fig, 76. The meter must give a reading (normally around 0.3 to 0.7 V) if the sond is working
correctly.
If there is no reading, replace and re-test with new Lambda sond.
Reconnect Lambda sond.
