volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Drive Shaft Installed|Page 1787 > < Drive Shaft Installed|Page 1785
Page 1
background image

Drive/Propeller Shafts, Bearings and Joints: Testing and Inspection

-

Vibrations and knocking noises are the most common complaints with propeller shafts and universal joints. Vibrations are often caused by wear,
poor lubrication and incorrect installation. A humming noise which increases with speed usually confirms a vibrating propeller shaft.

-

Worn universal joints usually cause knocking at low speeds and also when the accelerator pedal is depressed and released.

-

Cracked or damaged propeller shafts must not be repaired or realigned. New units must be installed instead.

Drive Shaft Installed|Page 1787 > < Drive Shaft Installed|Page 1785