240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
/Page-322005.png)
Push bracket (A) into slot in heater and secure with clip (B).
Bend mounting bracket (C) back into position.
A9
Install new hose and refit support Install:
- new hose (A) between firewall connection branch and valve. Tighten clamps.
- support (B) between body and heater.
A10
Remove hose clamping tools
Remove:
clamping tools from heater hoses in engine compartment.
A11
Checking procedure
Check:
- coolant level and tighten expansion tank cap.
- operation of heater with engine running.
- inspect for leakage.
- top up coolant, if necessary.
A12
Reinstall components
Remove:
