240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
764 CH. No. -->76899 and 765 CH. No. -->31199)use Type A or B. (see part no.
below)
NOTE:
If the car has a single-retractor belt, a dual-retractor seat belt system must be installed according to instructions found on page 338 of service
Manual TP 31127/1; Body, Interior, Climate.
extender, Type D
From 1990 M/Y (744, CH. No. 39700 -->, 745 CH. No. 242700 -->, 764 CH. No. 76900 -->, 765 CH. No. 31200 -->) to present use Type D.
780
From 1987 M/Y up to and including part of 1990 M/Y (780 CH. No. -->9964)
use Type A.
From part of 1990 M/Y (780 CH. No. 9965 -->) to present use Type D.
900
From 1991 to present, use Type D.
Extender, Type A, can be used in conjunction with the following seat belts:
P/N
NOTES
MODEL
3513285-1
Left
240
3513286-9
Right
240
1349971-0
Left
740/760
1349972-8
Right
740/760
1373246-6
Left
740/760
1373247-4
Right
740/760
1396072-9
Left
780
1396073-7
Right
780
Extender, Type B, can be used in conjunct on with the following seat belts:
P/N
NOTES
MODEL
1370146-1
Left
740/760
1370147-9
Right
740/760
Extender Type D can be used in conjunction with the following seat belts:
P/N
NOTES
MODEL
3525479-6
Left
740/760/900
3525480-4
Right
740/760/900
1374913-0
Left
780*
1374914-8
Right
780*
3406310-7
Left
780
3406311-5
Right
780
*only production P/N
Ordering Procedures;