240 L4-2127cc 2.1L SOHC B21A (Can) (1984)
Wiper Motor: Service and Repair
Windshield Wiper Motor
E2
Windscreen Wiper Motor, Replacement
- Undo motor mounting bolts (3).
- Undo connector.
- Remove glove compartment as.
- Lower soundproofing panel and remove lever mounting screw.
- If wiper arm has not stopped in parking position, lever clips must also be removed.
- Reassemble in reverse order.
- Check that wiper is in parking position before remounting lever.
- Check rubber seal.