240 L4-2127cc 2.1L SOHC Turbo B21FT FI (1982)
4. Position the oil slinger on the planetary gear carrier. Use a drift or chisel to secure it.
NOTE: The oil slinger must be a tight fit against the planetary gear carrier.
2835 Centering
5. Position the planetary gear assembly on the output shaft. Use centering tool P/N 2835 to guide the splines in planetary gear carrier and one-way
clutch.
Clutch Sliding Member Assembly
1. Use drift P/N 2806 to install the bearing in the bearing retainer.
2. Install the snap ring.
3. Install the bolts. Use drift P/N 2715 to press on bearing and retainer assembly.
