240 L4-2127cc 2.1L SOHC Turbo B21FT FI (1982)
Alternate method: Assemble the one-way clutch.
1- hub
2- roller cage
3- spring
Rotate the roller cage clockwise to end. Use the key (4) to lock it in position. Install the rollers. Hold them in position with a rubber band (5).
Make sure the thrust washer is properly located. Install the one-way clutch. Remove the rubber band.
NOTE: Thrust washer and output shaft must be mating parts.
20. Install oil slinger and snap ring.
