240 L4-2320cc 2.3L SOHC B23F FI (1983)
Air/Fuel Mixture: Adjustments
General:
-
It is important that the other engine settings are correctly adjusted (e.g., timing) if valid results are to be obtained.
-
The engine should be warm and idling.
-
Warm-up the engine at 25 r/s (1500 rpm).
-
Check / adjust the CO-content approx. 5 minutes after the radiator thermostat has opened (no earlier that 5 minutes).
Exhaust gas extraction:
-
Use an exhaust gas extractor that fits loosely over the exhaust pipe.
-
Excessive extraction may yield incorrect results when checking / adjusting CO-content.