volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Clutch and Reducing Valve Repairs|Page 2349 > < Clutch and Reducing Valve Repairs|Page 2347
Page 3
background image

2. Use a copper drift to tap loose the brake drum.

3. Position the front housing with the front end DOWN. Connect compressed air to the hole for the solenoid valve. Blow out the pistons.

4. Clamp the front housing in a vise with soft jaws. Remove the oil pan.

5. Remove the strainer. Use wrench P/N 2836 to remove the three plugs.

Clutch and Reducing Valve Repairs|Page 2349 > < Clutch and Reducing Valve Repairs|Page 2347