240 L4-2320cc 2.3L SOHC B23F FI (1983)
5. Make sure the thrust washer is properly located. If necessary, use grease to hold it in place.
6. Position ring tool and one-way clutch assembly. Turn one-way clutch hub clockwise while pressing one-way clutch into position.
NOTE: Thrust washer and output shaft must be mating parts.
Alternate method: Assemble the one-way clutch.
1- hub
2- roller cage
3- spring
Rotate the roller cage clockwise to end. Use the key (4) to lock it in position the rollers. Hold them in position with a rubber band (5).
Make sure the thrust washer is properly located. Install the one-way clutch. Remove the rubber band.
