240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
MOVING WIRING HARNESS (A) TO UNDERSIDE OF HEATER.
-
Expose about 50 mm of the black/white fan switch lead (B) from the cable stem and discard remaining insulation tape.
-
Route wiring harness to left side without pulling the black/white lead which could separate from the fan switch.
-
Route wiring harness down near left side of heater (C).
-
Route wiring harness under heater and across to right side (D) and locate as far back in the car as possible to give room for the heater control vacuum
tank.
Connecting Wiring Harness
