240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Separate pump from bracket
Remove pump mounting screws (three).
Remove existing spacers and rubber bushings.
Drill out holes in bracket
Drill out mounting holes (three) in bracket to 9 mm (23/64") dia. (unless replacing bracket with new component with 9 mm (23/64") holes).
Deburr holes as necessary.
P/N of bracket with 9 mm (23/64") holes is 9146074-1.
Install vacuum pump
Mount pump on bracket using new type of rubber insulators, p/n 9146075-8.
Insulator should be installed with wider groove (A) on vacuum pump.
Lubricate insulator to ease mounting.
