240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
- Engine cooling fan connector from the cable harness connector.
- Engine cooling fan rubber cushions from mountings.
- rubber cushions from engine cooling fan.
INSTALLATION OF SPACER WASHERS
Procedure:
- Install the engine cooling fan using the 3 new socket hex bolts, spacer washers and flanged lock nuts as a guide for the engine cooling fan frame
without tightening (tightening one nut may cause tension in the fan if all the nuts are not installed).
- Tighten nuts and use a socket hex wrench to hold the bolts.
Note!
Spin the fan by hand to check that it is not obstructed.
Reinstall:
- connector in the cable harness connector.
- connector in the tie strap.
- anti-corrosion agent on all new screws and nuts.
- the radiator grille.
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01
Op. #
Labor Description
Time Allowance
26906-2
Modification to engine cooling fan mounting
0.3 hr.
