240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Drive Plate-Automatic Trans.
6. Install Drive Plate:
-
Turn crankshaft to top dead center position for cylinder No. 1.
-
Position drive plate on crankshaft so that pin A is 15° below horizontal position, see illustration.
NOTE: There are two pins. Do not choose the wrong one!
-
Note position of base plates. The outer plate must be turned with edge outwards.
7. Install new bolts. Apply sealing compound, P/N 1161 056-5, to bolt threads.
Torque to 70 Nm (50 ft lbs). Use gear sector 5112 to lock flywheel.
