240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Heater Core: Service and Repair
Standard Heater Core Removal and Installation
Remove Standard Heater Unit, see Air Flow Control Box - Heater.
D1
Remove:
-
cell system drain hose (1)
-
air intake seal (2)
-
all the clips holding the heater housing halves together.
D2
Separate the two halves of the heater housing:
Remove the clips holding the control valve sensor head to the cell system (1).
Lift heater up. Transfer seal if installing new heater matrix.
D3