240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
- Press according to the adjacent diagram to delete.
- Check that the DTCs have been deleted in accordance with DTM 1 CA2.
If the DI system DTCS have not been read:
-Look for the text "A6 IGNITION SYSTEM: Press * ".
-Continue with DTM 1 CA2.
CA4
Diagnostic Test Mode (DTM) 2
Look for text "Mode 2: Activation Press according to diagrams X or Y.
-Press according to the adjacent diagram to activate.
-Activate the sensors one at a time.
-Read which sensors have been activated on the display.
It there is no response from the display and the LED still flashes rapidly when a sensor has been activated:
-The control module has not received a signal from the sensor.
CA5
Diagnostic test mode (DTM) 3
Look for text 'Mode 3: Cycl. act. Press * ".
-To initiate press according to the adjacent diagram.
-Listen to see if the component is activated.
If The Component Is Not Activated:
-The component is not receiving a signal from the control module.