240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Engine Control Module: Service and Repair
Fuel Injection
Control Unit Location
NOTE:Since any fault codes that may be stored in the fuel injection control unit memory will be lost if the battery or control unit is disconnected, fault
codes should be extracted.
1.
Remove the panel beneath the right side of the dashboard, door step molding, and side kick panel.
Harness Connector Removal
2.
With the ignition OFF release the harness connector catch and fold the harness connector downward.
3.
Remove the control unit from its' bracket.
4.
Reinstall the control unit in reverse manner.