240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Engine Control Module: Testing and Inspection
Fuel Injection
EA. DIAGNOSTIC TROUBLE CODE (DTC) 1-1-2 MFI LH 2.4 AND LH 3.1
1-1-2 Control Module Fault
DTC Conditions
The control module checks that its internal signals are correct. It this is not the case DTC 1-1-2 is posted.
Cause of fault:
Control module fault.
Fault symptoms:
None.
EA1
Diagnostic Test Mode (DTM) 1
-Delete the DTC.
-Start the engine and run it a short while.
-Switch off the engine.
-Ignition on.
Check to see if the DTC has recurred in accordance with the Data link Connector.
If the DTC has recurred:
-Try using a new control module.
