240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
5.
Remove connector protective sleeve.
IMPORTANT:^ Never check connections from the front. Connectors can get damaged and worsen the problem.
^ Check connections through the holes in the connector.
^ Connection pin numbers are printed on the connector side.
Checking Cold Start Injector
6.
Connect an ohmmeter between ECU connector pins 9 and 32.
Reading: approx. 10 ohms
7.
If not, check wiring and connectors. If wiring is O.K., replace cold start injector and retest.
8.
After testing, disconnect all test equipment, reconnect all connectors (including the ECU connector) and remount all panels.
