240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Throttle Plate - PFI: Adjustments
LH 3.1 Jetronic
***UPDATED BY TSB 25202704, MAY 1991
Fig. 357 BASIC THROTTLE SETTING
1.
Disconnect the throttle pulley link arm. Release the lock nut.
2.
Loosen the adjustment screw until the throttle is fully closed.
3.
Turn the adjustment screw clockwise until it just touches the link arm and then 1/4 turn more. Tighten the locking nut.
NOTE: It may be necessary to loosen the throttle switch to center the valve, prior to adjusting it.
Fig. 359 ADJUST THROTTLE PULLEY AND CABLE
4.
Check for smooth operation of the control pulley and cable.
5.
Adjust the throttle cable so it is stretched at idle, but does not affect the control pulley position. At idle the control pulley should touch the stop.
6.
With the accelerator pedal fully depressed, the control pulley should touch the full throttle stop.
