240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Engine Control Module: Service and Repair
Ignition
Control Unit Location
NOTE:Since any fault codes that may be stored in the ignition system control unit memory will be lost if the battery or control unit is disconnected, fault
codes should be extracted.
1.
Remove the panel beneath the right side of the dashboard, door step molding, and side kick panel.
2.
With the ignition OFF release the harness connector catch and fold the harness connector downward.
3.
Remove the control unit from its' bracket.
4.
Reinstall the control in reverse manner.