volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

TP Switch Signal Faulty at Idle|Page 2401 > < TP Switch Signal Faulty at Idle|Page 2399
Page 2
background image

-Ignition off.

Connect an ohr.1meter between terminals 18 and 3 on the TP switch.

The ohmmeter should read infinite resistance.

If this value is OK:

Intermittent fault.

-Check the connections for loose contacts.

If the reading is incorrect:

-Try using a new TP switch.

TP Switch Signal Faulty at Idle|Page 2401 > < TP Switch Signal Faulty at Idle|Page 2399