240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Ignition Cable: Technical Service Bulletins
Ignition Cable Harness - Replacement
NUMBER
11
GROUP
37
MODEL
200
TITLE
IGNITION SYSTEM HARNESS, REPLACEMENT 240 1980-->
MARKET
US and Canada
DATE
November 1992
THIS BULLETIN REPLACES SB 37-11 DATED JULY 1988
REFERENCE:
TP 30432/4 (ENGLISH); 07/89; 200 IGNITION SYSTEM
New cable harness--Chrysler ignition system
1988 M/Y 240 models are equipped with a Chrysler ignition system incorporating a new type of control unit and cable harness p/n 3515885-6.
If it is necessary to replace the cable harness on certain older vehicles, the new cable harness should be used. Note, however, the different part numbers.
When replacing a cable harness, note that three pin sleeves must be removed from the control unit connector according to the method in this bulletin.
Disconnect battery ground cable