240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Electronic Brake Control Module: Technical Service Bulletins
ABS Control Unit - Altered Location
NUMBER
202
GROUP
59
MODEL
200
TITLE
ALTERED LOCATION OF ABS
CONTROL MODULE
1992-->
MARKET
US and Canada
DATE
April 1993
REFERENCE:
TP 31678/1 (ENGLISH); 09/90; ANTI-LOCK BRAKING SYSTEM (ABS) 200
SERVICE BULLETIN 59-201; DATED 12/91
Altered location of ABS control module
From M/Y 1992, the ABS control module and transient surge protector have been mounted on the floor panel under the right front seat.
The following items must be removed to gain access to the control module: right front seat, A-post lower trim panel and sill moulding. Fold back front
and rear carpets and remove floor panel.
The module is mounted by two screws, as illustrated. To remove the module, slacken the rear screw, remove the front screw and pull the module (and
transient surge protector) forward.
When reinstalling the module, tighten screws to 10 N-m (7.5 ft.lb.).
WARRANTY STATEMENT:
Claims may be submitted under the New Car Limited Warranty when a manufacturing defect is present using claim type: 01.
Oper.No.
Labor Description
Time Allowance
593113
Control module, replace
0.1 hr
