240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
-Do not remove the battery leads when the engine is running.
-Remove the battery leads when boost charging.
-Do not use a boost charger or a higher voltage than 16V to aid starting.
Fire Risk
Take great care to avoid sparks, especially when testing the injectors.
High Tension
WARNING: The DI system operates at high power and dangerous voltages in the high tension circuit.
Control Modules
-The control module should not be heated above 80°C (176°F). Remove control modules when storing for example.
-Disconnect the control module connectors when arc welding.
-The control module should be removed if arc welding is to be carried out near it.
-Do not replace the control module without checking electrical leads and components. A fault could otherwise damage the new control module in the
same way as the original.