240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
- Cut approximately at 5 mm (3/16") depth along the casing's separation on line (A).
- Open flaps.
- Pull the Airbag out of the casing.
EXPOSURE OF NUT ON SCREW
- Turn Airbag to one side to expose the nut (B).
DRILLING THE SCREW OUT OF THE NUT
- Mark the screw center with a punch (C).
- Start hole with a 2 mm (5/64") diameter drill.
- Drill out screw using a 6 mm (15/64") drill.
REMOVAL OF AIRBAG
Remove:
