240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Remove gear selector panel and housing A2
Remove retaining screws and slide housing backwards.
Remove: A3
-
knee bolster. Bend aside insulation behind bolster.
-
center console panel on left-hand side
Loosen and fold aside carpet around front end of gear selector mechanism A4
Remove: A5
-
panels on both sides of combined instrument
-
instrument retaining screws
Lift instrument slightly and carefully undo connectors at rear. Remove instrument A6
Disconnect key lock cable at ignition switch A7
