240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Run cable as illustrated. Ensure that ignition key is turned to I or II. Press cable into ignition switch, ensuring that locking tabs are fully engaged.
Adjust cable A12
Turn ignition key to position 0 and move gear lever to position P.
Adjust cable so that clearance between ball on cable end and operating arm in selector mechanism is approx. 1.5 mm (0.06 in.).
Check key lock function (A13 - A14)
Move gear selector lever to position P A13
Turn ignition key to position I or II and back to O
Key should now be easy to remove from ignition switch. If not, cable is too short. Slacken adjuster slightly.
Move gear selector lever to position other than P A14
It should now be impossible to remove ignition key from switch
If key can he removed, cable is too long. Adjust cable until key cannot be removed.
