240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Stabilizer Bar: All Technical Service Bulletins
Suspension - New Sway Bar Bushing Procedure
MODEL
200
GROUP
76
NUMBER
105
TITLE
Sway Bar Bushing Replacement Service Campaign 62 200-series 1991-
MARKET
US and Canada
DATE
October 1992
Reference:
Service Manager Bulletin Gr. 76. No. 3 Service Campaign 62
INFORMATION
A new type of rubber bushing has been developed to improve the front sway bar attachment. The new bushing has a molded lug that fits into the bottom
slot on the brace. This applies to the standard factory-installed 21 mm sway bar only.
When vehicles listed VIN ranges return to your dealership for service, replace both left side and right side front sway bar bushings. Instructions are
provided.
Bushing replacement on a one-time basis can be submitted during the warranty period by using a standard warranty claim. Refer to SMB 76-3 for claim
submission instructions.
AFFECTED VEHICLES
The affected VIN ranges are:
MODEL
VIN RANGE
244
449952-482737
245
903627-947844
REQUIRED PARTS
PART NUMBER DESCRIPTION
QUANTITY
9131955-8
Bushing
2
1.
Lift the vehicle on a hoist or jack up and support it with the front end on stands.
2.
Remove the splash guard located under the engine.