240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
-
the bushing (E) loosely in the rear axle mounting.
-
drift 5568-2 (D) as illustrated, against rear axle outer trailing arm mounting.
Press:
-
the bushing (E) into rear axle mounting until the counterhold 5568 (A) is tight to the mounting.
Removing tools
Remove:
-
press tools.
-
spacer sleeve 5079-2.
Installing screw
Operations:
-
lower rear axle so that the holes in the bushing and the trailing arm are aligned.
-
install a new screw (P/N 947564-1).
-
install a new nut (P/N 971085-6).
NOTE!
Do not tighten screw.
-
lower the car.
-
move the car to a ramp.
-
tighten nut (P/N 971085-6) with the car resting on its wheels. Tighten to 130 Nm (96 ft.lbs).