240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Governor, Automatic Transmission: Service and Repair
Installation
1. Replace gasket under channel plate (AW: Clean oil filter).
2. Replace oil seal for flange and speedometer driven gear. Also check bushing in extension housing.
3. Reverse procedure to install governor.
-
Turn drive ring on BW55 to secure.
-
AW70 late type/AW71: install bolt, lock plate and drive ring. Tightening torque 4 Nm (3 ft lb).
4. Tightening torques (all transmissions):
-
rear extension housing 35 Nm (26 ft lb)
-
coupling flange 45 Nm (33 ft lb)
5. Fill oil and check level.