240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
13. Make sure that needle bearings and seals are in position in bearing cups.
14. Position spider in yoke. Install one of bearing cups on spider. Tap bearing cup lightly until seated.
15. Press in bearing cup using vice and suitable sleeve.
16. Press in bearing cups by approximately 3-4 mm (0.12-0.16 in).
16. Install circlips/snap rings.
17. Check position of spider. Make sure that end is centered in opposite end of yoke.
18. Install other bearing cup in yoke. Tap lightly until secure.
19. Press in bearing cup and install circlip/snap ring. When second bearing cup is pressed into position, first bearing cup is pressed against its
circlip/snap ring.