240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
20. Install spider in propeller shaft yoke. Insert spider in yoke and install bearing cups, one at a time as previously described.
21. Check universal joint. If joint is stiff or binds, place propeller shaft yoke or flange yoke between vice as illustrated and lightly tap ends with a
plastic mallet or copper hammer.
22. Check support bearing. Bearing must rotate without noise or binding. Check rubber bearing mounting.
23. Replacing support bearing/rubber mounting:
-
Remove rubber mounting
-
Remove bearing with a drift
CAUTION: Take care not to damage the dust cover.