240 L4-2320cc 2.3L SOHC VIN 83 B230FD (1993)
Wiper Motor: Service and Repair
Rear Wiper Motor
E3
Rear Wiper Motor, Replacement
- Remove wiper arm, nut, washer and sealing ring. Open tailgate and remove:
‹› handle trim.
‹› cover under handle.
‹› panel upholstery.
- Remove motor mounting screws and disconnect leads.
- Remove motor.
Install New Motor
- Mount motor on bracket.
- Install motor and bracket in car.
Note: Use short screws at bracket upper mounting point. Connect rear window heater and wiper motor to ground.
