240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
Install/connect:
- hose from heater to valve. Tighten hose clamp.
- secure hose in retainer (A).
- close valve and remove hose clamping tool.
Note:
Valve must be closed or coolant will leak from heater.
B7
Install mounting bracket and valve
Push bracket (A) into slot in heater and secure with clip (B).
Bend mounting bracket (C & D) back into position.
B8
Reinstall hose and refit support Install:
-
new hose (A) between bulkhead connection branch and valve. Tighten clamp.
-
support (B) between body and heater.
B10
Remove hose clamping tools
Remove: