240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
Set pump and tighten camshaft rear sprocket
Use 5199 to hold sprocket. Torque wrench should be at right angle to wrench 5201 otherwise torque will be incorrect.
Using 5199, turn sprocket slowly clockwise until dial indicator shows: 0.85 mm (0.0335 in)
Hold sprocket in this position and torque bolt to 100 Nm (73 ft. lbs). Take care that camshaft and sprocket do not move.
Remove stop 5193 from pump gear
