volvo Workshop Repair Guides

Volvo Workshop Service and Repair Manuals

Testing Diodes with Bosch Tester|Page 1610 > < Testing Diodes with Bosch Tester|Page 1608
Page 2
background image

Mark front and rear housings so that they can be reassembled correctly.

F5 Disassemble alternator

NOTE: Clamp alternator in a vise and separate two housings using two screwdrivers. Do not insert screwdrivers more than 2 mm (1/4 in.)

otherwise stator coil may be damaged.

F6 Before testing

Remove stator phase terminals from diodes. A short circuited diode can affect test.

 Twin Parallel-Connected Power Diodes

F7 NOTES:

Bosch N1 14 V 70 A 20, N1 14 V 90A alternators. Disconnect twin, parallel-connected power diodes and proceed to F8.

*SPECIAL CASE:

Bosch N1 14 V 31/80 with booster diode; *Carry out test according to E6-E8 in Testing Diodes using BOSCH TESTER.

Testing Diodes with Bosch Tester|Page 1610 > < Testing Diodes with Bosch Tester|Page 1608