240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
Trailing Arm Bushing: Technical Service Bulletins
Tools - Replacing Trailing Arm Bushing
SECTION
6
GROUP
65
NO.
203
DATE
Jan. 1997
RE:
Replacing trailing and bushing
200
REFERENCE:
TP 30125/2, SECTION 6 (65) REAR WHEEL SUSPENSION; 240/260 1975-
Replacing trailing arm bushing
Background:
A new press tool to suit air/hydraulic presses for removing and installing trailing arm bushing on the rear axle. This Service Bulletin covers replacing the
trailing arm bushing with these press tools.
Materials:
Screw
947564-1
Nut
971085-6
Bushing
1229165-4
Shop Equipment required: Underhoist utility stand or transmission jack.
Tool:
Hydraulic pump, air-driven
9512615-7 or
9512564-7
alternative Hydraulic pump
9995576-7
Puller cylinder (included in hydraulic pump
kits identified above)
9995575.9
Puller rod (included in hydraulic pump
kits identified above)
9995592-4
Spacer sleeve
9995079-2
Press tool (5568, 5568-1 and 5568-2)
9995568-4
The tools are further described in Special Tool Bulletin no. 96
Removing trailing arm bushing
Removing screw for trailing arm
Raise the car:
-
use a 2 pillar hoist.
Lift rear axle:
-
position the mobile jack under the rear axle and apply slight pressure.
Remove:
