240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
3. Remove brake discs. Parking brake must be in the full release position. Remove the two Phillips head screws and lift off the brake discs. Tap on
the inside of the disc with a plastic hammer or similar tool if necessary.
4. Remove parking brake shoes. Unhook and remove the springs using brake spring pliers.
5. Disconnect parking brake cables. Press out the lock pin securing the brake cables to the levers. Use 3mm punch if the pin does not fall out.
6. Free bearing retainers. Remove four bolts (hex 15mm) to free bearing retainers.
