240 L6-2383cc 2.4L DSL SOHC D24 FI (1982)
14. Install gearshift lever knob. Position gearshift lever in vise with soft jaws. Use plastic mallet to carefully knock knob into position
15. Assemble gearshift lever. Install upper part of gearshift lever on lower part in vehicle. Install lock pin.
16. Check reverse detent for correct operation. Engage first gear. Distance between detent plate and detent screw should be 0.5-1.5 mm (0.02-0.06 in).
Adjust by moving detent plate. Also engage second gear and recheck distance.