740 L4-2.3L SOHC VIN 88 B230F (1985)
outside edge of template (as shown by dashed line in illustration).
Note:
Mark out straight past, not around hose connection branch.
Remove template and cut out enlarged opening. Use power jigsaw or cut manually with hacksaw blade along marked line.
Note:
Cut-out section is referred to as reinforcing piece in following text. The piece is used to reinforce motor mounting in new housing when installing
original motor.
Cut: (from new fan housing)
-
three motor locating pins with hacksaw (Cut pins flush with housing. See shaded areas in illustration.)
-
file cut surfaces smooth.
Remove: (from new fan housing)
-
raised edge around outside of opening. Use Knife.