740 L4-2.3L SOHC VIN 88 B230F (1985)
Checking Terminal Pins
10.
Check that terminal contacts have been pushed down evenly in connector.
11.
If any connectors have been pushed down to far, poor connection may result.
12.
Connect an ohmmeter between fuel injection ECU connector pin 12 and ignition ECU connector pin 15.
Reading: 0 ohm
If reading is different, repair wire (red - black) or connectors and retest.
13.
Disconnect the test equipment. Reconnect the ECU and all other connectors, install the panels and glove compartment.
